Poppits Quick Fix

Water supplied by water authorities generally contains chlorine in various amounts, which are often dependent upon the water table level and local conditions. The water will always have a chlorine concentration as well as other organic and inorganic matter.

ENQUIRE ABOUT THIS PRODUCT

POPPITS brand - Quick Fix - chlorine free oxidiser is used to oxidise or “burn up” these contaminants and leave the water free from chlorine and ready to be balanced and then sanitised.

Poppit Quick Fix is recommended during the initial start-up of your new spa and also for weekly maintenance.

Features & Benefits:

  • Chlorine free oxidiser
  • Ideal for the regular cleaning and maintenance of spas as well as those in need of a quick clean up
  • Oxidises organic material

Available Pack Size:

  • 1kg and,
  • 475g Containers
 

DIRECTIONS FOR USE

1. Broadcast the required amount into the middle of the Spa or deep end of the pool.

2. Turn on filter and pumps and run for 4 hours.

3. Apply when no swimmers or bathers are in the water, they may re-enter the water 30 minutes after treatment.

4. Maintain the pH within the range 7.2-7.6, total alkalinity between 80 to 120 ppm.

TREATING CLOUDY SPA WATER

If spa water is cloudy or there is a malodour, add 30 grams/1,000 Litres of water and run filter for 4 hours.

If necessary repeat the process.

ENSURE PIPES ARE REGULARLY CLEANED WITH POPPIT SPA PIPE DEGREASER

Please Contact Us if you need additional information

POPPITS brand - Quick Fix - chlorine free oxidiser is used to oxidise or “burn up” these contaminants and leave the water free from chlorine and ready to be balanced and then sanitised.

Poppit Quick Fix is recommended during the initial start-up of your new spa and also for weekly maintenance.

Features & Benefits:

  • Chlorine free oxidiser
  • Ideal for the regular cleaning and maintenance of spas as well as those in need of a quick clean up
  • Oxidises organic material

Available Pack Size:

  • 1kg and,
  • 475g Containers
 

DIRECTIONS FOR USE

1. Broadcast the required amount into the middle of the Spa or deep end of the pool.

2. Turn on filter and pumps and run for 4 hours.

3. Apply when no swimmers or bathers are in the water, they may re-enter the water 30 minutes after treatment.

4. Maintain the pH within the range 7.2-7.6, total alkalinity between 80 to 120 ppm.

TREATING CLOUDY SPA WATER

If spa water is cloudy or there is a malodour, add 30 grams/1,000 Litres of water and run filter for 4 hours.

If necessary repeat the process.

ENSURE PIPES ARE REGULARLY CLEANED WITH POPPIT SPA PIPE DEGREASER

Please Contact Us if you need additional information